how to Use and maintenance of projection lamp

how to Use and maintenance of projection lamp


Bulb fear most often baking for a long time

Moment, the projector on the market from the first-tier manufacturers like Samsung, BenQ, Optoma code, according to the research reflect these brand projector both product workmanship, quality, after sales service, could make consumers satisfaction assured, so, in addition to individual cases, the projector automatically shuts down the culprit, we can exclude quality reasons.

Use, improper maintenance - According to a survey, in fact, cause the projector automatically shuts down or because of the temperature of the lamp, the heat not be able to shed caused when the projection lamp or the temperature inside the machine, projector hot protection function comes into play, along with the working status of the projector will automatically switch to the protection of state - the projector is automatically shut down, this time, you do not know what to do or worry about, first of all the measures taken after the projector automatically shut down after about half an hour, and then follow the normal boot sequence to turn on the projector, you can usually allow the projector to resume normal work.

In fact, solve the automatic shutdown cure a dustproof structure of the projector to be cleaned on a regular basis to ensure that the entire air duct patency maximize bulb cooling; Do not let the other is the projection bulb uninterrupted work long hours - I propose the user as much as possible not to allow the projector to continue to work more than 5 - 6 hours, even if the cooling fan, especially in the higher temperature environment can play a role in cooling, but still very long period of high temperature baking likely to cause the life of the attenuation of the light bulb, so, business education and home users, we must be reasonable arrangements for the time of the projected work. In addition, there is little need to explain general 200W bulb most reasonable continuous working time is 3 - 4 hours, beyond this time, we'd better let the projection halfway standby for an hour, until the lamp has cooled, and then to use.




Avoid direct unplug the power

Projector shutdown cooling fan will continue to rely on the power in the state of the high-speed operation over a period of time, the main purpose is to do so in order to let the bulb after prolonged use can be cooled to the lowest temperature, thus shortening when the fan stops working natural cooling time of the bulb, so when the user finished using the projector, it is recommended that until the fan stops working completely, unplug the power, so you can ensure the projection after each use, and can shorten the natural cooling with time, but also indirect from role to extend lamp life. Part of the special needs of that complete business people that go, the market has been that opened that off the projector with a small accumulators, can guarantee to cut off power supply fan can continue to work until the heat is dissipated, also can do the demo is complete you can cut off the power to the projector away.




Avoid repeated movement

In the projection process, we will certainly encounter To adjust the projector position, this time, a lot of people will be taken directly move to adjust to the appropriate placement. But here I want to warn that, in fact, the projection lamp when the temperature is very high, then the light bulb filament inside is usually semi-molten state at this time frequently moving the projector, it is likely The damage projection lamp. Therefore, I suggest, if it is placed in the projection, when we use two or three times the best can the projector be placed lock, such as a non-exceptional circumstances, we must avoid moving, so that not only each easy to use, and also reduce projection consequential damages.




Projector lamp replacement / installation method is very particular about the

When the projection lamp needs to be replaced, we should instantly view the projector enclosed instructions to ensure the maintenance and replacement steps correct; At the same time, the purchase of the lamp, we need to confirm what general types of bulbs can be compatible with the projector If you choose the wrong type of bulb, which are not compatible, and even may burn the projection lamp or projector.

Short so the Jingui the objects, we usually use the best be treated with caution, meticulously maintained, only one ultimate goal, to maximize the extended lamp life savings.

more tips please visit www.1projectorlamp.com